2021 Terex® Shredding TDS 825

Information

2021 Terex® Shredding TDS 825

The TDS 825 tracked slow speed shredder has customisable shredding programs that allow operators to configure the machine to their specific requirements, maximising production. The hydrostatic drive offers protection against contamination and allows for bi-directional shredding while independent gear boxes enable each shaft to run separately helping to reduce wrappage and improve the shredding of material. This double shaft shredder has 2.5m long shafts made from solid steel, with a fully welded tooth configuration giving an extremely high production rate with excellent size reduction. Located in the centre of the chamber, directly below the shredding shafts is the replaceable breaker bar. A number of options are available depending on the level of reduction required, these are easily replaceable due to the side door chamber access.

Powered by a 770HP Scania V8 DC16 engine, the machine has been designed to provide operators with unrivalled levels of service access. The high volume, tipping hopper increases the feed area providing optimum material feed and can be activated using the control panel or via the remote control. Hydraulic folding hopper extensions allows for increased capacity, preventing the infeed material from falling out especially in bulky applications. The TDS 825 is manoeuvred via a robust tracked undercarriage making it a great solution for difficult terrain.

Photos

Highlights

  • Bushnell, Florida
  • 2021
  • Terex®
  • Shredding TDS 825
  • Available
  • Transfer Conveyor: 400mm (4’ 7”) | Product Conveyor: 1400mm (4’ 7”)
  • Feed: 3385mm (11’ 1”) | Discharge: 4300mm (14’ 1”) – 2000mm (6’ 6”)

Specifications

  • 2021
  • Terex®
  • Shredding
  • TDS 825
  • General
  • Scania
  • DC16
  • 770HP (566kW)
  • Tier 4 Final
  • Shaft: 165 000Nm
  • Transfer Max. belt speed: 160m/min (520’ /min) | Product Max. belt speed: 150m/min (490’ /min)
  • Shaft Diameter: 400mm solid | Effective Tool Diameter: 870mm | Shoe: 500mm (20”) | Sprocket Centres: 3800mm (12’ 6”)
  • Shaft: 8'2" / 2,500mm | Working: 13860mm (45’ 6”) (product belt @ 35°) | Transfer Conveyor: 3100mm (10’ 2”) | Product Conveyor: 6700mm (21’ 11”) | Shredding Unit Shaft: 2260mm
  • 9700mm (32’)
  • 3000mm (9’ 10”)
  • 3400mm (11’ 2”)
  • 3000mm (9’ 10”)
  • Feed: 3385mm (11’ 1”) | Discharge: 4300mm (14’ 1”) – 2000mm (6’ 6”)
  • Transfer Conveyor: 400mm (4’ 7”) | Product Conveyor: 1400mm (4’ 7”)
  • Type of shredder: Twin shaft slow speed | Autolube for shredder shaft bearing | Autolube for shredder shaft bearing | CleanFix variable pitch cooling fan | Shredder Drive: Twin Hydrostatic (Independent Shaft Drive) | Bolt on tracks
  • 1000l
  • Transport: 46,500Kg (102,514lbs)