2025 Komatsu Wheel Loaders WA380-8

Information

2025 Komatsu Wheel Loaders WA380-8

When you need one wheel loader to handle multiple jobs

Needing an all-around machine doesn’t mean you have to settle for a middle-of-the-road one. The WA 380-8 can handle multiple tasks — waste, recycling, snow removal, road work and paving — easily, with a fully integrated set of components designed to work together over the long haul.

Features may include:

Conserve fuel
  • Your engine torque needs to match the demands on the machine to use fuel most efficiently. To help minimize fuel consumption, Komatsu Smart Loader Logic optimizes engine torque.
Work efficiently with managed torque
  • An efficient powertrain helps maximize fuel efficiency and productivity. The large capacity torque converter allows your operators to up-shift gears faster for outstanding acceleration and maintain high travel speed in load-and-carry applications.
Choose the best mode for your application
  • Optimize efficiency with a machine working in the mode suited for the workload. For maximum fuel efficiency for general loading, run in Economy mode and choose Power mode for maximum power output for hard-digging operation or hill climbing.
Minimize environmental impact
  • Leveraging technology to lower fuel consumption and emissions. Proprietary systems reduce particulates and seek optimal engine performance in all speed and load conditions. EPA Tier 4 final engine cuts NOx by more than 80% vs Tier 4 Interim levels.
Save time
  • Your operators can set the bucket angle and remote boom positioner from the cab and adjust upper and lower boom kick-outs with the push of a button. The bucket positioner stores three horizontal settings, so operators can easily change attachments.

Photos

Highlights

  • Bushnell, Florida
  • 2025
  • Komatsu
  • Wheel Loaders WA380-8
  • Model: SAA6D107E-3
  • Automatic, full-powershift, counter-shaft type
  • Available

Specifications

  • 2025
  • Komatsu
  • Wheel Loaders
  • WA380-8
  • Large
  • Model: SAA6D107E-3
  • Komatsu
  • 4-cycle
  • 2,100 rpm
  • SAE J1995 - Gross: 192 HP | ISO 9249/SAE J1349 - Net: 191 HP
  • Variable geometry, turbo-charged, after-cooled, cooled EGR
  • 6
  • Water-cooled
  • 4.21 in
  • 4.88 in
  • 408 in³
  • Gear pump, force-lubrication
  • Automatic, full-powershift, counter-shaft type
  • Four-wheel drive
  • Fixed, semi-floating
  • Center-pin support, semi-floating, 24° total oscillation
  • Reduction: Spiral bevel gear | Diferential: Torque proportioning | Final reduction: Planetary gear, single reduction
  • All-speed, electronic
  • Articulated type, fully-hydraulic power steering | Angle: 35° (40° to max end stop)
  • Hydraulically actuated, wet disc brakes actuate on four wheels
  • Wet disc brake
  • Hydraulic cycle time Raise: 5.9 s / Dump: 1.8 s / Lower (Empty): 3.3 s
  • 1st gear: 4.1 mph | 2nd gear: 7.3 mph | 2nd gear (Lock-up clutch ON): 7.7 mph | 3rd gear: 13.0 mph | 3rd gear (Lock-up clutch ON): 13.9 mph | 4th gear: 22.4 mph | 4th gear (Lock-up clutch ON): 23.3 mph | Reverse: 1st gear: 4.4 mph | 2nd gear: 7.7 mph | 2nd gear (Lock-up clutch ON): 8.3 mph | 3rd gear: 13.9 mph | 3rd gear (Lock-up clutch ON): 15.0 mph | 4th gear: 24.0 mph | 4th gear (Lock-up clutch ON): 23.3 mph
  • Piston type
  • Steering Capacity: 36.2 US gpm | Loader Control capacity: 54.15 US gpm
  • Steering: 3,555 psi | Loader control: 4,550 psi
  • 20 ft. 9 in
  • 16.0 US gal
  • tank: 79.3 US gal
  • 37.5 US gal
  • 10.6 US gal
  • 10.6 US gall
  • Filter: Full-flow type | Control valve: 2-spool type | Boom: Raise, hold, lower, and float | Bucket: Tilt-back, hold, and dump