2025 Komatsu Trucks HD465-8

Information

2025 Komatsu Trucks HD465-8

Maneuverability that makes you take notice

The HD465-8 delivers a tight turning radius and optimal traction in a variety of ground conditions. A seven-speed, fully automatic transmission with skip shift gives this truck the power and speed to help you meet your demanding production needs.

Features may include:

MacPherson-strut-type suspension
  • A comfortable ride, even on uneven roads. The MacPherson-strut-type independent front suspension allows the front wheels to follow uneven road surfaces smoothly.
Fully hydraulic wet multiple-disc brakes
  • Give your operator greater confidence at higher downhill speeds with wet multiple-disc brakes. Continuously oil-cooled, multiple-disc brakes function as a highly responsive retarder for added reliability and stable brake performance.
Automatic retard speed control
  • Let your operator concentrate on steering by simply setting the downhill travel speed at increments of 0.6 mph to match the optimum speed for slope. Travel speed is automatically lowered if oil temperature increases to a set limit.
K-ATOMiCS transmission
  • Komatsu Advanced Transmission with Optimum Modulation Control System (K-ATOMiCS) helps avoid unnecessary fuel consumption, reduce material spillage and provide a smoother ride for operators by automatically selecting a gear position depending on grade, speed and acceleration.
Komatsu Traction Control System (KTCS)
  • KTCS is engineered for optimal traction in soft or wet road conditions with a system that monitors for wheel slippage at the rear axle. If slippage is detected, brakes are applied independently and automatically to each wheel set.

Photos

Highlights

  • Bushnell, Florida
  • 2025
  • Komatsu
  • Trucks HD465-8
  • Full-automatic, planetary type | Speed range: Seven speeds forward and one reverse
  • Available
  • Target area: 12 ft. 8 in
  • at full dump: 28 ft. 10 in

Specifications

  • 2025
  • Komatsu
  • Trucks
  • HD465-8
  • General
  • Komatsu SAA6D170E-7
  • SAE J1995: 775 HP | ISO9249/SAE J1349: 724 HP
  • 4-cycle
  • Maximum: 2,688 lbs.-ft.
  • Water-cooled
  • Variable geometry, turbo-charged, air-to-air after-cooled, cooled Exhaust Gas Recirculation (EGR)
  • 6
  • 6.69 in
  • 6.69 in
  • Piston: 930 in³
  • Dry type with double elements and precleaner (cyclone pack type), and evacuator valve
  • Gear pump, force-lubrication
  • EPA Tier 4 Final
  • Direct injection
  • Full-automatic, planetary type | Speed range: Seven speeds forward and one reverse
  • Wet, multiple-disc clutch
  • Electronically controlled
  • Fully hydraulic power steering with two double-acting cylinders | Supplementary steering: Manually controlled (meets ISO 5010)
  • 24.00 R35
  • 24.00 R35
  • Hoist time: 11.5 s
  • 2,000 rpm | Maximum travel speed: 43.5 mph
  • 2,990 psi | Material (high tensile strength steel): 184,900 psi
  • Material thickness: Bottom: 0.75 in | Material thickness: Front: 0.47 in | Material thickness: Sides: 0.35 in | Front: 0.47 in | Maximum steering angle: 39° | Effective cylinder stroke (front suspension): 11.9 in | Oil stopper: 6.8° | Mechanical stopper: 7.7° | Dumping angle: 48°
  • 28 ft. 6 in
  • Target area: 21 ft. 2
  • Target area: 12 ft. 8 in
  • at full dump: 28 ft. 10 in
  • 32.7 yd3
  • (2:1, SAE): 44.7 yd3
  • Differential: 3.538 | Planetary: 4.737
  • 211.3 US gal
  • Engine: 21.1 US gal
  • system: 39.4 US gal
  • 61 US tons
  • Empty: 106,748 lbs.| Standard tire: 228,178 lbs. | Empty: Front axle: 53% | Rear axle: 47% | Loaded: Front axle: 34% | Rear axle: 66%