Current Komatsu Trucks

2025 Komatsu Trucks 930E-5SE

2025 Komatsu Trucks 930E-5SE

Swipe to View More

  • Year 2025
  • Make Komatsu
  • Model Trucks
  • Engine Model: SSDA18V170
Shop Komatsu Pre-Owned
Product Details Specifications Photos
2025 Komatsu Trucks 930E-5SE

2025 Komatsu Trucks 930E-5SE

  • Year 2025
  • Manufacturer Komatsu
  • Model Name Trucks
  • Trim Name 930E-5SE
  • Generic Type (Primary) Mining
  • Engine Manufacturer Komatsu
  • Engine Model: SSDA18V170
  • Engine Power Gross horsepower: 3,500 HP @ 1,800 rpm | Net flywheel power: 3,346 HP @ 1,800 rpm
  • Cylinder Liners 18
  • Stroke Front: 12.92" | Rear: 9.40"

2025 Komatsu Trucks 930E-5SE

Built for performance, operability, and sustainability

From its high-horsepower diesel engine and electric-drive powertrain to the ergonomically designed operator cab, the 930E-5SE has been engineered to promote increased productivity, an upgraded driving experience and a reduced carbon footprint.

Features may include:

Operator comfort
  • Automotive-styled operator cabin meets the latest ISO standards. Ergonomic features, spacious cabin, and user-friendly display offer comfort and promote operator efficiency.
Structurally designed frame
  • Durability is vital when cycling through big loads. Developed using advanced computer-aided design, finite element analysis and full-scale dynamic testing, the 930E-5SE’s frame can carry rated payload with structural reliability.
Cruise control
  • Automotive-stlye cruise control governs acceleration and deceleration. Helps operators maintain a constant speed while concentrating on steering and situational awareness.
Traction control
  • Helps operators stay on task and operate efficiently, even in slippery conditions. Wheel traction control technology detects and corrects wheel spin or slide events — engages automatically and independently of the service brakes.
Monitor efficiency with payload data
  • Payload Meter IV (PLM IV) helps increase production by working to optimize payloads, maximize cycle efficiency and reduce the life cycle costs of your machine. PLM IV tracks and records key production parameters.

Engine

Engine Manufacturer Komatsu
Engine Model: SSDA18V170
Engine Power Gross horsepower: 3,500 HP @ 1,800 rpm | Net flywheel power: 3,346 HP @ 1,800 rpm
Cylinder Liners 18
Stroke Front: 12.92" | Rear: 9.40"

Fuel System

Fuel Type Diesel

Drivetrain

Drive Control AC torque control system
Drivetrain Drive axle mounting: Pin and spherical bushing | Drive axle alignment: Swing link between frame and axle
Drive System Traction system: Wheel spin-slide control
Steering Variable displacement piston pump with output of 64 gpm at 1,800 rpm | Accumulator assisted with twin double acting cylinders provide constant rate steering; secondary steering automatically supplied by accumulator | Filtration Suction Hoist and steering In-line replacement elements Single, full flow, 100 mesh Dual, in-line, high pressure

Suspension

Front Suspension 12.92"
Rear Suspension 9.40"

Brakes

Brake System Type Oil-cooled, hydraulic actuated, multiple disc brakes at each wheel | Complies with ISO-3450 standards | component cabinet: Above deck, easily accessible with diagnostic test connections
Parking Brake Multiple disc, spring-applied, hydraulically released, dry brakes on inboard end of each wheel motor rotor shaft. Rated to hold on ±15% grade at maximum gross vehicle weight

Electric

Alternator GTA-62 | 24 V, 275 A
Electrical Ratio: 32.62:1 | dynamic retarder: 5,400 HP | Lighting: 24 V | Cranking motors: 2 x 24 V

Wheels & Tires

Tires, Front Specification Rock service, tubeless, radial tires Standard tire: 53/80 R63
Tires, Rear Specification Rock service, tubeless, radial tires Standard tire: 53/80 R63

Operational

Operating Conditions Single impeller in-line blower: 127.4 m3/min (4,500 cfm) | Floor sheet: 0.63" outer / 0.75" center 200,000 psi tensile strength steel | Front sheet: 0.39" outer / 0.47" center 200,000 psi tensile strength steel | Side sheet: 0.39" 1379 MPa 200,000 psi tensile strength steel | Canopy sheet: 0.24" 690 MPa 200,000 psi tensile strength steel | Hoist times Power-up loaded Power-down (high idle) Float-down empty (low idle): 21 s /12 s /18s
Top Speed 40 mph
Maximum Pressure Max. service apply: 2,500 psi | System relief pressures Hoist and brake cooling Steering and brake: 2,750 psi /4,000 psi | Plate material: 70,000 psi | tensile strength steel Casting material: 90,000 psi tensile strength steel

Hydraulics

Hydraulic Pump Two pumps, single package, in-line

Dimensions

Width 12"
Depth, Maximum 34"
Dimensions Top and bottom plate thickness: 1.77" | Side plate thickness: 0.98" rear / 1.26" front | Total friction area per brake: 15,038 in2 | Radiator frontal area: 75.5 ft2 | Turning circle diameter (SAE): 105'

Capacities

Heaped Capacity 264 yd3
Features Reservoir: 250 US gal | Crankcase: 95.8 gal | Motor gear box (each): 15 gal | DEF tank: 84 gal
Cooling 150 gal
Hydraulic Capacity 350 gal
Fuel Capacity (non-emissionized): 1,400 gal | (tier IV): 1,200 gal

Weights

Weight 25,897 lbs. | Tire: 57,000 lbs. | Standard Komatsu bodyweight: 79,869 lbs.
Dry Weight 24,798 lbs.

Features

Features Maximum rear axle oscillation: 6.5° | Auto apply system: Automatically applied prior to hydraulic system pressure dropping below level required secondary stopping requirements | Wheel brake lock: Switch-activated | Hoist: Two 3-stage dual-acting outboard cylinders, internal cushion valve, over-center dampening | Hoist and brake cooling: Tandem gear pump with output of 240 gpm at 1,800 rpm

Product Photography