2024 Komatsu Excavators PC650LC-11

Information

2024 Komatsu Excavators PC650LC-11

Versatility and high performance for heavy-duty applications

For high performance, transportability and adaptability to your heavy-duty applications, the PC650LC-11 excavator has a dual swing motor and three arm lengths. Your operator will appreciate the comfortable, climate-controlled cab and your crew will welcome an engine designed for easy access and maintenance.

Features may include:

Increased horsepower
  • You will appreciate the low operating noise, easy serviceability of emissions components and increased horsepower (+7 hp) of the high-performance engine that is EPA Tier 4 Final emissions certified.
Engineered for long life
  • Your excavator is designed to be part of your fleet for a long time with its sturdy undercarriage, robust under guards and the use of thick, high-tensile-strength steel plates throughout the boom and arm structures.
Quick cycle times
  • For your heavy-duty projects, the dual swing motors and arm quick return circuit provide fast cycle times under heavy loads.
Easy to move
  • You will enjoy how easy it is to transport the PC650LC-11 between job sites and the less disassembly required to meet transportation weight requirements. Plus, you don’t need to rent a crane to remove the counterweight during movement, which can help lower your transportation costs.
Simplified maintenance
  • Ease of serviceability with latched service access doors and grouped service points. Designed to save time and money on repairs, Tier 4 Final emission system diagnostics monitor up to 167 vehicle parameters and notifies you when and where maintenance is required.
Cost-saving hydraulic efficiency
  • You will appreciate this machine’s increased hydraulic efficiency and reduced fuel consumption with its larger bucket return piping size that reduces hydraulic back pressure in the bucket circuit in order to match the machine load to hydraulic pump output.

Photos

Highlights

  • Bushnell, Florida
  • 2024
  • Komatsu
  • Excavators PC650LC-11
  • Model: SAA6D125E-7
  • Available

Specifications

  • 2024
  • Komatsu
  • Excavators
  • PC650LC-11
  • Large
  • Model: SAA6D125E-7
  • Komatsu
  • Water-cooled
  • 6
  • 5.51 in | Hydraulic cylinders Boom: 7.3 in | Hydraulic cylinders Arm: 7.9 in | Hydraulic cylinders Bucket: 7.3 in
  • 6.50 in | Hydraulic cylinders Boom: 67.9 in | Hydraulic cylinders Arm: 80.5 in | Hydraulic cylinders Bucket: 56.1 in
  • Piston: 930 in³
  • SAE J1995 (Gross): 439 HP | ISO9249 / SAE J1349 (Net): 436 HP | Hydraulic fan at maximum speed (Net): 392 HP
  • 1,800 rpm
  • 4-cycle, | Fan drive type: Hydraulic
  • Komatsu Variable Geometry Turbocharger with air-to-air aftercooled EGR
  • Swing circle lubrication: Grease-bathed
  • Swing torque: 154,481 ft.-lbs.
  • Travel: Axial piston motor, in-shoe design
  • direct
  • All-speed control, electronic.
  • control: Two levers with pedals
  • method: Fully hydrostatic | Swing System method: 2 x hydraulic motors
  • Hydraulic lock | Swing brake: Oil disc brake | Holding brake/Swing lock: Mechanical disc brake
  • Oil disc brake
  • Gradeability: 70%, 35° | Maximum drawbar pull: 93,250 lbf.
  • High: 3.0 mph | Low: 1.9 mph | Swing: 8.3 rpm
  • Triple-Grouser Shoes 24 in: 15.16 psi | Triple-Grouser Shoes 30 in: 12.3 psi | Triple-Grouser Shoes 35.5 in: 10.3 psi
  • Exterior – ISO 6395: 104 dB(A) | Operator – ISO 6396: 73 dB(A)
  • Variable capacity piston | Pumps for: Boom, arm, bucket, swing, and travel circuits | Sub-pump for control circuit: Gear type
  • Maximum flow: 2 x 108 US gpm
  • Implement circuits: 4,700 psi | Travel circuit: 4,980 psi | Swing circuit: 3,700 psi | Pilot circuit: 430 psi
  • Center frame: H-leg | Track frame: Box-section
  • Hydraulic cylinders Boom (rod diameter): 4.7 in | Hydraulic cylinders Arm (rod diameter): 5.5 in | | Hydraulic cylinders Bucket (rod diameter): 5.1 in
  • Engine: 12.7 US gal | tank: 232.5 US gal | Final drive (each side): 2.65 US gal | Swing drive: 2 x 3.4 US gal | Diesel Exhaust Fluid (DEF) tank: 16.4 US gal
  • 95.0 US gal
  • 20.1 US gal
  • Triple-Grouser Shoes 24 in: 140,456 lbs. | Triple-Grouser Shoes 30 in: 142,396 lbs. | Triple-Grouser Shoes 35.5 in: 144,292 lbs.
  • Reduction system: Planetary double reduction | Swing reduction: Planetary gear | Number of shoes (each side): 52 | Number of carrier rollers (each side): 3 | Number of track rollers (each side): 9
  • Sealed | adjuster: Hydraulic