2024 Komatsu Excavators PC210LCi-11

Information

2024 Komatsu Excavators PC210LCi-11

Let our second-generation PC210LCi-11 make every pass count. From precise footing work to retentions ponds to utility work, our smallest machine control excavator is a productive and versatile solution. A trusted leader in intelligent machine control design, the updated, factory-integrated system minimizes over-excavation and empowers operators to dig straight to grade, faster with greater accuracy.

Features may include:

Perform finish grading using only arm input
  • Your operators can finish grade quickly and accurately with a bucket angle hold control that automatically holds the bucket angle to the design surface during arm operation, enabling operators to perform finish grading using only arm input.
Auto tilt bucket control
  • Auto tilt bucket control assists the operator in aligning the bucket parallel with the slope, so that finish grading can be accomplished without having to align the machine with the target surface.
Adjusts to the operator’s experience level
  • A fully integrated grade assist automatically traces the target surface to minimize over digging. A built-in facing angle compass ensures the machine is aligned with the target surface.
Auto stop control
  • To help eliminate potential damage during boom or bucket operation, the machine automatically stops when the bucket edge reaches the design surface.
Minimum distance control
  • IMC controls the bucket by automatically selecting the point closest to the target surface, which minimizes operator input while providing higher accuracy and grading confidence.
Critical precision for utility applications
  • For utility customers looking for the utmost precision, the excavator allows your operator to input structure, invert elevations of pipe runs and automatically calculates fall of pipe.

Photos

Highlights

  • Bushnell, Florida
  • 2024
  • Komatsu
  • Excavators PC210LCi-11
  • Model: SAA6D107E-3
  • Available

Specifications

  • 2024
  • Komatsu
  • Excavators
  • PC210LCi-11
  • Medium
  • Model: SAA6D107E-3
  • Komatsu
  • Water-cooled | Fan drive method for radiator cooling: Mechanical with viscous fan clutch
  • 6
  • 4.21 in | Hydraulic cylinders Boom: 5.1 in | Hydraulic cylinders Arm: 5.3 in | Hydraulic cylinders Bucket: 4.5 in
  • 4.88 in | Hydraulic cylinders Boom: 52.5 in | Hydraulic cylinders Arm: 58.7 in | Hydraulic cylinders Bucket: 44.1 in
  • Piston: 408 in³
  • ISO 9249 / SAE J1349 - Net: 165 HP | Fan at maximum speed - Net: 159 HP
  • 2,000 rpm
  • 4-cycle,
  • Komatsu Variable Geometry Turbocharged, aftercooled, cooled EGR
  • Swing circle lubrication: Grease-bathed
  • Swing torque: 49,907 ft.-lbs.
  • Travel: 2 x axial piston motors with parking brake | Swing: 1 x axial piston motor with swing holding brake
  • direct
  • All-speed control, electronic
  • control: Two levers with pedals
  • method: Fully hydrostatic | Swing System method: Hydraulic motor
  • Hydraulic lock | Swing brake: Hydrostatic | Swing lock: Hydraulic lock | Swing Holding brake/Swing lock: Mechanical disc brake
  • Mechanical disc brake
  • Gradeability: 70%, 35° | Maximum drawbar pull: 45,349 lbf.
  • High: 3.4 mph | Mid: 2.5 mph | Low: 1.9 mph | Swing: 12.4 rpm
  • Triple-Grouser 28 in: 5.8 psi | Triple-Grouser 31.5 in: 5.2 psi
  • Exterior – ISO 6395: 100 dB(A) | Operator – ISO 6396: 66 dB(A)
  • Variable capacity piston type | Pumps for: Boom, arm, bucket, swing, and travel circuits | Supply for control circuit: Self-reducing valve
  • Maximum flow: 125.5 US gpm | Maximum Auxiliary Flow at 3,553 psi: 64 US gpm
  • Implement circuits: 5,400 psi | Travel circuit: 5,400 psi | Swing circuit: 4,195 psi | Pilot circuit: 470 psi
  • Center frame: X-frame | Track frame: Box-section
  • Hydraulic cylinders Boom (rod diameter): 3.5 in | Hydraulic cylinders Arm (rod diameter): 3.7 in | Hydraulic cylinders Bucket (rod diameter): 3.2 in
  • Engine: 6.1 US gal | tank: 105.7 US gal | Final drive (each side): 1.3 US gal | Swing drive: 1.7 US gal | DEF tank: 6.1 US gal
  • 34.9 US gal | system: 61.8 US gal
  • 8.1 US gal
  • Triple-Grouser 28 in: 50,706 lbs. | Triple-Grouser 31.5 in: 51,588 lbs.
  • Swing reduction: Planetary gear | Number of shoes (each side): 49 | Number of carrier rollers (each side): 2 | Number of track rollers (each side): 9
  • Sealed | adjuster: Hydraulic