2024 Komatsu Excavators PC130LC-11

Information

2024 Komatsu Excavators PC130LC-11

This machine is a powerful yet nimble 97.2 HP conventional tail swing excavator that is easily transportable. Thoughtfully designed for customers who want durability, reliability and productivity, the PC130LC-11 can handle a wide variety of utility work or small construction jobs while fitting the changing needs of your business as it grows.

Features may include:

Lightweight and powerful
  • The PC130LC-11 is nimble and can easily handle a wide variety of utility work or small construction jobs, providing a versatile workhorse for you as your business expands and grows.
Increased performance
  • Thanks to the long undercarriage design, the PC130LC-11 lifting capacities have increased up to 20% compared to the previous model. This increase can help your business to complete jobs quicker.
Optimal hydraulic flow
  • High hydraulic pressures help optimize high arm and bucket digging forces for exceptional performance.
Steel castings
  • Durable steel castings in the boom foot, boom nose and arm tip help spread working loads away from high-stress areas for improved long-term durability.
Auto-idle shut down
  • Reduce fuel consumption with the auto idle shutdown feature that can be set to automatically stop the engine after a preset amount of idle time.
One-piece rear-opening hood
  • A large one-piece hood, ground-level grease points, engine oil and fuel filters provide quick-and-easy service access.

Photos

Highlights

  • Bushnell, Florida
  • 2024
  • Komatsu
  • Excavators PC130LC-11
  • Model: SAA4D95LE-7
  • Available

Specifications

  • 2024
  • Komatsu
  • Excavators
  • PC130LC-11
  • Mini
  • Model: SAA4D95LE-7
  • Komatsu
  • Water-cooled | Fan drive method for radiator cooling: Mechanical with viscous clutch
  • 4
  • 3.74 in | Hydraulic cylinders Boom: 4 in | Hydraulic cylinders Arm: 5 in | Hydraulic cylinders Bucket: 4 in
  • 4.53 in | Hydraulic cylinders Boom: 39 in | Hydraulic cylinders Arm: 46 in | Hydraulic cylinders Bucket: 35 in
  • Piston: 199 in³
  • SAE J1995 / Gross: 97.3 HP | ISO 9249 / SAE J1349 / Net: 97.2 HP | Fan at maximum speed /Net: 90.9 HP
  • 2,050 rpm
  • 4-cycle,
  • Variable flow, turbocharged, air-to-air aftercooled
  • Swing circle lubrication: Grease-bathed
  • Swing torque: 21,627 ft.-lbs.
  • Travel: 2 x piston motor with parking brake | Swing: 1 x piston motor with swing holding brake
  • direct
  • All-speed control, electronic
  • control: HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve
  • method: 6 | Swing System method: Hydraulic motor
  • Hydraulic lock | Swing brake: Hydraulic lock | Swing lock: Wet, multiple-disc brake
  • Wet, multiple-disc
  • Maximum drawbar pull: 27,560 lbf.
  • High: 3.4 mph | Low: 1.8 mph | Swing: 11.0 rpm
  • 20 in Road Liner: 5.40 psi | 24 in Triple: 4.54 psi | 28 in Triple: 3.95 psi
  • Exterior – ISO 6395: 101 dB(A) | Operator – ISO 6396: 71 dB(A)
  • Variable capacity piston type | Pumps for: Boom, arm, bucket, swing, and travel circuits
  • Maximum flow: 64 US gpm | Maximum Auxiliary Flow at 250 kgf/cm2 3,553 psi: 64 US gpm
  • Implement circuits: 5,050 psi | Travel circuit: 5,050 psi | Swing circuit: 4,240 psi | Pilot circuit: 470 psi
  • Center frame: X-leg frame | Track frame: Box-section
  • Hydraulic cylinders Boom (rod diameter): 3 in | Hydraulic cylinders Arm (rod diameter): 3 in | Hydraulic cylinders Bucket (rod diameter): 3 in
  • Engine: 3.0 US gal | tank: 66 US gal | Final drive (each side): 0.55 US gal | Swing drive: 0.7 US gal | DEF tank: 5.6 US gal
  • 18.2 US gal
  • 4.6 US gal
  • 20 in Road Liner: 28,440 lbs. | 24 in Triple: 28,660 lbs. | 28 in Triple: 29,101 lbs.
  • Gradeability: Variable capacity piston type | Swing reduction: Planetary gear | Number of shoes (each side): 46 | Number of carrier rollers (each side): 2 | Number of track rollers (each side): 8
  • Sealed | adjuster: Hydraulic