2025 Komatsu Crushing UFB-14S

Information

2025 Komatsu Crushing Stamler UFB-14S

Integral to your operation’s productivity

Developed to provide the same traditional reliability and low cost of ownership as previous designs, the UFB-14S reduces manufacturing lead times, drives improved inventory and is more maintenance-friendly.

Features may include:

Promotes increased productivity
  • Since the feeder breaker is located closer to the working face, haulage distances and travel times are reduced, resulting in increased production and efficiency of the remaining section equipment.
Easier section moves
  • Equipped with a powerful crawler drive system for quick, efficient belt moves. Plus, the feeder breaker can be connected to the conveyor belt to move them both simultaneously, saving time.
Splined breaker shafts
  • Splined connection versus a compression connection can reduce assembly and disassembly time by more than 50%, reducing downtime for replacement and service. Splined connection is also 25% stronger than previous connections.* *based on internal testing
Camera system
  • Forward and rearward cameras provide remote monitoring of haulage equipment receiving payload and discharging onto the material handling system.

Photos

Highlights

  • Bushnell, Florida
  • 2025
  • Komatsu
  • Crushing UFB-14S
  • Available
  • Seam: Greater than 75 in | Min. Tram: 38 in

Specifications

  • 2025
  • Komatsu
  • Crushing
  • UFB-14S
  • General
  • Hagglunds CA70 hydraulic motor
  • Machine voltage: 1,000 VAC @ 60 Hz | Control voltage: 120 VAC @ 60 Hz | Recommended Size: 2/0 FOR 1000V SHD-GC | Breaker / Conveyor Drive: 150 kW / 200 HP Voltage: 1000 VAC @ 60 Hz | Conveyor Reversing/Jogging Drive: 5 HP (3.7 kW) | Voltage: 1000 VAC @ 60 Hz
  • Convey & Tram - open-loop variable volume, load sense, pressure compensated | Conveyor Reversing Drive – gear pump
  • Breaker Pick Force: Up to 90,000 lbs.
  • Max. Input Size: 16 in | Output Size, P95: 8 in | Maximum Discharge Clearance: 30 in | 305 mm (12 in) tape switch
  • Seam: Greater than 75 in | Min. Tram: 38 in
  • 430 in
  • Tram: 132 in | intake: 119 in
  • Throughput (Standard): Up to 1,500 TPH | Coal 60 lbf.-ft3/Potash 75 lbf.-ft3/ Trona 80 lbf.-ft3 /Gypsum 80 lbf.-ft3: 1,200 TPH/1,700 TPH/1,700 TPH/1,500 TPH
  • Estimated Mass: 88,200 lbs.