2025 Caterpillar Small Wheel Loaders 926

Information

2025 Caterpillar Small Wheel Loaders 926

Configured for Success

The 926 Small Wheel Loader sets the standard for productivity, fuel efficiency, operator comfort and low operating costs. Experience the industry benchmark.

Features may include:
  • Move more with the Caterpillar patented quick loading performance series buckets and optimized Z-bar linkage with enhanced forward visibility that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to confidently handle loads with precise control.
  • Have a seat in the new Cat small wheel loader and enjoy automatic temperature control, class leading sound levels, enhanced all-around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on your jobsite.
  • Guard Your Investment: Choose from a complete range of guarding to protect your machine from the harsh environment of a waste handling application. Machine guarding is purpose built to protect the machine’s major components.
  • Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.
  • The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.

Photos

Highlights

  • Bushnell, Florida
  • 2025
  • Caterpillar
  • Small Wheel Loaders 926
  • Available
  • Height - Ground to Cab**: 10.92 ft | Height - Ground to Beacon**: 12.17 ft | Height - Ground to Axle Center**: 2.25 ft | Height - Ground Clearance**: 1.33 ft | Clearance - Bucket at 45°*: 9.42 ft | Clearance - Load over Height**: 11 ft | Clearance - Level Bucket**: 11.75 ft | Height - Bucket Pin**: 12.83 ft|

Specifications

  • 2025
  • Caterpillar
  • Small Wheel Loaders
  • 926
  • Small
  • Cat
  • Model: Cat C7.1* | Performance Mode: Automatic
  • Rated Gross - SAE J1995: 170 hp | SAE J1995 (DIN): 172 mhp | ISO 14396: 168 hp | ISO 14396 (DIN): 170 mhp | SAE J1349 at Minimum Fan Speed: 165 hp | ISO 9249 at Minimum Fan Speed: 165 hp | ISO 9249 (DIN) at Minimum Fan Speed: 167 mhp | Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4): 511 ft·lbf | Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3): 511 ft·lbf | Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3): 531 ft·lbf | Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4): 531 ft·lbf | Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4): 517 ft·lbf | Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3): 517 ft·lbf | Maximum Steering Torque - 0° (Straight Machine: 37155 ft·lbf | Maximum Steering Torque - 40° (Full Turn): 27747 ft·lbf
  • Rated Engine Speed: 1800 r/min | Engine Speed: 1400 r/min
  • 427 in³| (Standard Power Mode: Speed Range 1-3): 427 in³
  • 4 in
  • 5 in
  • Forward and Reverse - Range 1*: 1-13 km/h (0.6-8 mph) | Forward and Reverse - Range 2: 8 mile/h | Forward and Reverse - Range 3: 17 mile/h | Forward and Reverse - Range 4: 25 mile/h
  • Size: 20.5 R25, radial (L-3)| Fixed; Locking differential (standard)
  • Size: 20.5 R25, radial (L-3) | Rear: Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)
  • Cylinder - Bore Diameter: 2.8 in | Cylinder - Rod Diameter: 1.6 in | Cylinder - Stroke: 17.2 in | Maximum Flow - Steering Pump: 34 gal/min | Maximum Working Pressure - Steering Pump: 3500 psi | Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited: 2.8 s | Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed: 2.4 s
  • Standard Mode at 1,600 rpm - Total Cycle Time: 10.5 s | Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time: 9.5 s | Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level: 2.6 s | Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level: 2.6 s | Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift: 6.2 s | Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height: 1.7 s | Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height: 1.5 s | Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift: 5.5 s | Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed: 2.4 s
  • Average Exterior Pressure (ISO 6395:2008): 101 dB(A) | Operator Pressure (ISO 6396:2008): 68 dB(A)
  • Implement Pump: 40 gal/min | Implement Pump - 3rd Function Maximum Flow*: 40 gal/min | Implement Pump - 4th Function Maximum Flow*: 40 gal/min
  • Relief Pressure - Tilt Cylinder: 4061 psi | Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure: 3771 psi | Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure: 4061 psi
  • Tank: 23.8 gal (US) | System - Including Tank: 42.3 gal (US) | Hydraulic System - Including Tank: 42.3 gal (US)
  • 5.5 gal (US)
  • 5.5 gal (US)
  • ROPS: ISO 3471:2008| FOPS: ISO 3449:2005 LEVEL II
  • Length - Hitch to Front Axle: 4.92 ft | Length - Wheel Base: 9.83 ft
  • Length - Overall*: 24.25 ft | Length - Rear Axle to Bumper: 6.42 ft
  • Height - Ground to Cab**: 10.92 ft | Height - Ground to Beacon**: 12.17 ft | Height - Ground to Axle Center**: 2.25 ft | Height - Ground Clearance**: 1.33 ft | Clearance - Bucket at 45°*: 9.42 ft | Clearance - Load over Height**: 11 ft | Clearance - Level Bucket**: 11.75 ft | Height - Bucket Pin**: 12.83 ft|
  • Height - Overall**: 16.67 ft
  • Over Bucket: 19.33 ft | Outside of Tires: 17.75 ft | Inside of Tires: 9.33 f
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: 3.5 turns | Recyclability: 95%
  • Bucket: 2.5-6.5 yd³ (1.9-5 m³) | Bucket Capacities: 1.9-5 m3 (2.5-6.5 yd3) | Bucket Capacities - Light Material: 4.0-6.5 yd³ (3.1-5 m³)
  • Engine Crankcase: 5.3 gal (US)
  • Tank: 51.5 gal (US) | Diesel Exhaust Fluid (DEF) Tank: 5 gal (US)
  • 7.9 gal (US)
  • 28535 lb | Operating Weight: 27972 lb | Operating Weight - High Lift: 28767 lb