2022 Caterpillar Motor Graders 160

Information

2022 Caterpillar Motor Graders 160

OVERVIEW

The Cat® 160/160 AWD (160M3) motor graders deliver power, efficiency, operating finesse and operator comfort to the job. This high-performance machine minimizes emissions with the latest control technologies, without loss of productivity.

Features may include:

designed For Operators
  • experience The Most Spacious, Comfortable Cab In The Industry.
  • easy-to-learn Joystick Controls Replace Levers, So Hand And Arm Movement Is Reduced By 78%, Helping Reduce Operator Fatigue For Better Productivity.
  • left Joystick Controls Steering, Articulation, Return-to-center, Wheel Lean, Gear Selection, Left Moldboard Lift Cylinder And Float.
  • right Joystick Controls Drawbar, Circle And Moldboard Functions As Well As Electronic Throttle Control And Manual Differential Lock/unlock.
  • joystick Lean Angle Mirrors The Steer Tires' Turning Angle.
  • a Brake Tensioning System Holds The Joystick In Position Until The Operator Moves It.
  • steering Control Automatically Reduces Sensitivity At Higher Ground Speeds For Predictable Control.
  • infinitely Variable Roller Switches Control The Rear Ripper And/or Front Lift Group (When Equipped).
  • control Switches Are In Easy Reach.
  • control Pods Are Electronically Positioned Allowing Each Operator To Set The Ideal Operating Position.
  • multiple Isolation Mounts Reduce Sound And Vibration For A More Relaxed Work Environment.
  • high Capacity Heating, Ventilation And Air Conditioning (Hvac) System Dehumidifies And Pressurizes The Cab, Circulates Fresh Air, Seals Out Dust And Keeps Windows Clear.
  • new Message Display Shows Machine Performance And Diagnostic Information. Located In Center Console, It Also Displays Grade Control Cross Slope Readings.
  • electronic Throttle Control Helps Improve Productivity By Providing The Best Match Of Horsepower And Torque For The Demands Of The Application.
  • articulation Return-to-center Automatically Returns The Machine To A Straight Frame Position From Any Angle With The Touch Of A Button.
  • select Fine, Normal Or Coarse Blade Lift Modulation To Best Fit Application Or Operator Preference.
powerful Efficiency
  • cat C9.3 Engine Delivers The Performance Needed To Maintain Consistent Grading Speeds For Maximum Productivity.
  • latest Engine Technology Optimize Productivity, Fuel Efficiency, Reliability, Life And Minimize Emissions.
  • hydraulic Demand Fan Automatically Adjusts Speed According To Engine Cooling Requirements. When Cooling Demand Is Reduced, You Benefit From More Power To The Ground And Improved Fuel Efficiency.
  • engine Idle Shutdown Timer Is Software-enabled By Your Cat Dealer To Shut Down The Engine After A Set Period Of Time To Save You Fuel And Help Reduce Emissions.
  • the Motor Gradersgive You Efficiency And Longevity In Your Most Demanding Applications.
  • standard Automatic Differential Lock/unlock Unlocks The Differential During A Turn And Re-locks When Straight For Easier Operation And To Help Protect The Power Train.
  • full Electronic Clutch Pressure Control System Optimizes Inching Modulation For Smooth Shifts And Directional Changes, Reducing Stress On Gears.
  • programmable Autoshift Option Simplifies Operation By Allowing The Operator To Program The Transmission To Shift At Optimal Points To Match Your Application.
  • eco Mode Can Be Engaged For Up To 10% Fuel Savings Depending Upon Application.

Photos

Highlights

  • Bushnell, Florida
  • 2022
  • Caterpillar
  • Motor Graders 160
  • Model: Cat® C9.3
  • APECS, Direct Drive, Powershift
  • Available
  • Drawbar: 3 in | Front-Top/Bottom Plate: 12 in | 8 in | Blade: 14 ft | Cutting Edge: 6 in | End Bit: 6 in | Moldboard - Blade: 14 ft | Working: 46.6 in / 47.4 in / 40.6 in / 84 in | Outside Front Tires: 98.9 in | Outside Rear Tires: 98.9 in | Tire Center Lines: 84.3 in |
  • Drawbar: 6 in | Circle: 6.3 in | Front Frame Structure: 12.6 in | Front Axle - to Center: 23.5 in | 22.5 in | Moldboard: 24 in | Top of Cab: 130 in | Front Axle Center: 23.5 in | Exhaust Stack: 128 in | Top of Cylinders: 120 in

Specifications

  • 2022
  • Caterpillar
  • Motor Graders
  • 160
  • General
  • Model: Cat® C9.3
  • Base (1st Gear) - Net: 221 HP | VHP Plus - Gear - Net: Forward 1st 221 HP / Forward 8th: 272 HP / Forward 3rd: 241 HP / Forward 4th: 252 HP / Forward 2nd: 231 HP / Forward 6th: 262 HP / Forward 7th: 267 HP / Reverse 1st 221 HP / Forward 5th 257 HP / Reverse 2nd 231 HP / Reverse 3rd-6th 241 HP | VHP Plus Range - Net: 221-272 hp (165-203 kW) | se Power (1st Gear) - Net - Metric: 224 HP | VHP Plus Range - Net - Metric: 224-276 hp (165-203 kW)
  • 4.5 in
  • 5.9 in
  • 2,000 rpm | High Ambient - Fan - Maximum: 1,550 rpm | High Ambient - Fan - Minimum: 500 rpm
  • Rise: 39% | Maximum - VHP Plus: 1000 lb/ft
  • U.S. EPA Tier 4 Final/EU Stage V
  • 567.5 in³
  • 6
  • 8 Forward/6 Reverse
  • APECS, Direct Drive, Powershift
  • Service: Multiple Oil Disc | Secondary: Dual Circuit Control
  • Multiple Oil Disc
  • Top - Forward: 29.5 mile/h | Top - Reverse: 23.3 mile/h | Forward - 1st: 2.6 mile/h | Forward - 2nd: 3.5 mile/h | Forward - 3rd 5.1: mile/h | Forward - 4th: 7 mile/h | Forward - 5th: 10.8 mile/h | Forward - 6th: 14.7 mile/h | Forward - 7th: 20.3 mile/h | Forward - 8th: 29.5 mile/h | Reverse - 1st: 2 mile/h | Reverse - 2nd: 3.8 mile/h | Reverse - 3rd: 5.5 mile/h | Reverse - 4th: 8.5 mile/h | Reverse - 5th: 16 mile/h | Reverse - 6th: 23.3 mile/h
  • Penetration Force: 20812 lb | Pry-Out Force: 28493 lb
  • Variable Piston
  • Pump Output: 55.5 gal/min
  • System: 3503 psi | Standby: 885 psi
  • Derating Altitude: 10000 ft | High - Ambient Capability: 122 °F | Brakes - Service - Surface Area: 3565 in² | Steering Range - Left/Right: 50° | Articulation Angle - Left/Right: 20° | Circle - Diameter: 61.1 in | Circle - Blade Beam Thickness: 1.6 in | Front Frame Structure: 12 in | Drawbar - Thickness: 0.5 in | Front-Top/Bottom Plate - Thickness: 0.87 in | Front Axle - Wheel Lean - Left/Right: 18° | Front Axle - Total Oscillation per Side: 32° | Sidewall Thickness - Inner: 0.69 in| Sidewall Thickness - Outer: 0.71 in | Drive Chain Pitch: 2 in | Wheel Axle Spacing: 60 in | Tandem Oscillation - Front Up: 15° | Tandem Oscillation - Front Down: 25° | Moldboard - Thickness: 0.87 in | Cutting Edge Thickness: 0.6 in | End Bit - Thickness: 0.6 in | End Bit - Thickness: 0.6 in | Circle Centershift - Right: 28.7 in | Circle Centershift - Left: 27.4 in | Moldboard Sideshift - Right: 26 in | Moldboard Sideshift - Left: 20.1 in | Maximum Blade Position Angle: 90° | Blade Tip Range - Forward: 40° | Blade Tip Range - Backward: 5° | Maximum Shoulder Reach Outside of Tires - Left: 82.3 in | Maximum Shoulder Reach Outside of Tires - Right: 89.7 in | Ripper Shank Holder Spacing: 21 in | Scarifier Shank Holder Spacing: 4.6 in | Scarifier Shank Holder Spacing: 4.6 in / 10.5 in
  • Arc: 16.3 in
  • Drawbar: 3 in | Front-Top/Bottom Plate: 12 in | 8 in | Blade: 14 ft | Cutting Edge: 6 in | End Bit: 6 in | Moldboard - Blade: 14 ft | Working: 46.6 in / 47.4 in / 40.6 in / 84 in | Outside Front Tires: 98.9 in | Outside Rear Tires: 98.9 in | Tire Center Lines: 84.3 in |
  • Drawbar: 6 in | Circle: 6.3 in | Front Frame Structure: 12.6 in | Front Axle - to Center: 23.5 in | 22.5 in | Moldboard: 24 in | Top of Cab: 130 in | Front Axle Center: 23.5 in | Exhaust Stack: 128 in | Top of Cylinders: 120 in
  • Throat: 6.5 in | Maximum Lift Above: 17.8 in | Rear Axle: 13.3 in
  • of Cut. 29.5 in | Ripping: 16.8 in | Scarifying: 18.4 in / 16.8 in / 11.5 in
  • Machine Increase, Beam Raised: 40.6 in | Counterweight to Ripper: 399 in | Front Axle to Mid Tandem: 241 in | Front Tire to Rear of Machine: 351 in | Front Axle to Moldboard: 100 in | Between Tandem Axles: 60 in
  • Reservoir Tank: 16.9 gal (US) | Tank: 104 gal (US)
  • Circuit Type: Parallel
  • DEF: 5.8 gal (US)
  • System: 26.4 gal (US) | System - Tank: 16.9 gal (US)
  • 15 gal (US)
  • Engine: 7.9 gal (US)
  • Blade Pull - Base GVW: 25931 lb | Blade Pull - Maximum GVW: 34262 lb | Blade Down Pressure - Base GVW: 17004 lb | Blade Down Pressure - Maximum GVW: 29308 lb | Gross Vehicle - Maximum - Rear Axle: 38069 lb | Gross Vehicle - Base - Front Axle: 9907 lb | Gross Vehicle - Base - Rear Axle: 28812 lb | Gross Vehicle - Maximum - Total: 55144 lb | Gross Vehicle - Base - Total: 38719 lb | Gross Vehicle - Maximum - Front Axle: 17075 lb
  • Operating - Typically Equipped: 45547 lb | Operating - Typically Equipped - Front Axle: 13237 lb | Operating - Typically Equipped - Total: 45547 lb | Operating - Typically Equipped - Rear Axle: 32310 lb