2022 Caterpillar Motor Graders 140

Information

2022 Caterpillar Motor Graders 140

OVERVIEW

Cat® 140 (12M3) AWD delivers best-in-class updates to optimize performance. It brings the latest emissions control technology, unparalleled visibility, engine and control technology and a pedigree that ensures peak grading performance and durability.

Features may include:

better Comfort And Control
  • the Most Comfortable Cab In The Industry.
  • joystick Controls Reduce Hand And Arm Movement By 78%, Which Helps To Lower Operator Fatigue.
  • easy-reach Rocker And Control Switches
  • standard Cat Comfort Series Suspension Seat.
  • control Pods Adjust Electronically - Easy To Set Ideal Operating Position.
  • isolation Mounts Reduce Sound And Vibration For More Relaxed Environment.
  • high Capacity Heating, Ventilation And Air Conditioning (Hvac) System Dehumidifies And Pressurizes The Cab, Circulates Fresh Air, Seals Out Dust And Keeps Windows Clear.
  • in-dash Instrument Cluster Houses Easily Read, High-visibility Gauges And Warning Lamps Keep You Aware Of Critical System Information.
  • two Electro-hydraulic Joysticks Make Operation Easy And Comfortable. Adjustable Control Pods Ensure They Are Positioned For Optimal Comfort, Visibility And Operation.
  • joystick Functions
  • left Joystick Controls Steering, Articulation, Return-to-center, Wheel Lean, Gear Selection, Left Moldboard Lift Cylinder And Float.
  • right Joystick Controls Drawbar, Circle And Moldboard Functions As Well As Electronic Throttle Control And Manual Differential Lock/unlock. Joystick Lean Angle Mirrors The Steer Tires' Turning Angle.
  • brake Tensioning System Holds The Joystick In Position Until The Operator Moves It.
  • steering Control Automatically Reduces Steering Sensitivity At Higher Ground Speeds For Predictable Control.
  • infinitely Variable Roller Switches Control The Rear Ripper And/or Front Lift Group (When Equipped).
  • proven Load-sensing And Advanced Electro-hydraulics Give You Superior Implement Control And Responsive Hydraulic Performance That Makes Operators' Jobs Easier.
  • continuously Matching Hydraulic Flow/pressure To Power Demands Reduces Heat And Optimizes Power.
  • proportional Priority Pressure-compensating (Ppp-c) Valves Have Different Flow Rates For The Head And Rod Ends Of The Cylinder, So You Can Count On Consistent, Predictable Implement Response.
  • hydraulic Flow Is Proportioned To Give You Confidence That All Implements Operate Simultaneously Without Slowing Engine Or Implement Speed.
  • blade Float Allows The Blade To Move Freely Under Its Own Weight.
  • float Both Cylinders, To Allow Blade Can Follow The Contours Of The Ground.
  • float One Cylinder To Permit The Toe Of The Blade To Follow A Hard Surface While The Operator Controls Slope With The Other Cylinder.
  • large, Independent Hydraulic Oil Supplies Prevent Cross-contamination And Provide Proper Cooling, Reducing Heat Build-up And Extending Component Life.
  • cat Xt™ Hose Allows High Pressures For Maximum Power And Reduced Downtime.
  • articulation Return-to-center Automatically Returns The Machine To A Straight Frame Position From Any Angle With The Touch Of A Button.
  • choose The Blade Lift Modulation Mode That Best Fits Your Application Or Operating Style: Fine, Normal, Or Coarse.
performance And Productivity
  • at C9.3 Engine Delivers The Performance You Need To Maintain Consistent Grading Speeds For Maximum Productivity.

Photos

Highlights

  • Bushnell, Florida
  • 2022
  • Caterpillar
  • Motor Graders 140
  • Model: Cat® C9.3
  • APECS, Direct Drive, Powershift
  • Available
  • Drawbar: 3 in | Front Frame Structure: 12 in | Front-Top/Bottom Plate: 12 in | 7.9 in | Blade: 12 ft | Cutting Edge: 6 in | End Bit: 6 in | End Bit - Thickness: 0.6 in | Moldboard - Blade: 12 ft | Working: 40.6 in / 47.4 in / 46.6 in / 84 in | Outside Front Tires: 98.9 in | Outside Rear Tires: 98.9 in | Tire Center Lines. 84.3 in
  • Drawbar: 6 in | Front Frame Structure: 12.6 in | Circle: 5.4 in | Front Axle - to Center: 23.5 in | 19.9 in | Moldboard: 24 in | Moldboard - Thickness: 0.87 in | Top of Cab: 130 in | Front Axle Center: 23.5 in | Exhaust Stack: 128 in | Top of Cylinders: 120 in

Specifications

  • 2022
  • Caterpillar
  • Motor Graders
  • 140
  • General
  • Model: Cat® C9.3
  • Base (1st Gear) - Net: 179 HP | VHP Plus - Gear - Net: Reverse 3rd-6th 200 HP / Forward 2nd 189 HP / Forward 5th 215 HP / Forward 3rd 200 HP / Forward 8th 231 HP / Reverse 2nd 189 HP / Forward 1st 179 HP / Forward 6th 220 HP / Reverse 1st 179 HP | VHP Plus Range - Net: 179-231 hp (133-172 kW) | VHP Plus - Gear - Net - Forward 7th: 225 HP | VHP Plus Range - Net - Metric: 181-234 hp (133-172 kW) | VHP Plus - Gear - Net - Forward 4th: 210 HP | Base (1st Gear) - Net - Metric: 181 HP
  • 4.5 in
  • 5.9 in
  • 2,000 rpm | High Ambient - Fan - Maximum: 1,550 rpm | High Ambient - Fan - Minimum: 500 rpm
  • Maximum - VHP Plus: 840 lb/ft | Rise: 38%
  • U.S. EPA Tier 4 Final/EU Stage V
  • 567.5 in³
  • 6
  • Service: Multiple Oil Disc | Secondary: Dual Circuit
  • Multiple Oil Disc
  • APECS, Direct Drive, Powershift
  • 8 Forward/6 Reverse
  • Top - Forward: 29 mile/h | Top - Reverse: 23 mile/h | Forward - 1st: 2.5 mile/h | Forward - 2nd: 3.4 mile/h | Forward - 3rd: 5 mile/h | Forward - 4th: 6.9 mile/h | Forward - 5th: 10.6 mile/h | Forward - 6th: 14.5 mile/h | Forward - 7th: 19.9 mile/h | Forward - 8th: 29 mile/h | Reverse - 1st: 2 mile/h | Reverse - 2nd: 3.7 mile/h | Reverse - 3rd: 5.4 mile/h | Reverse - 4th: 8.4 mile/h | Reverse - 5th: 15.7 mile/h | Reverse - 6th: 23 mile/h
  • Penetration Force: 20812 lb | Pry-Out Force: 27794 lb
  • Variable Piston
  • Pump Output: 55.7 gal/min
  • System: 3500 psi | Standby: 885 psi
  • Derating Altitude: 10000 ft | High - Ambient Capability: 122 °F | Brakes - Service - Surface Area: 3565 in² |Steering Range - Left/Right: 50° | Articulation Angle - Left/Right: 20° | Circle - Diameter: 60.2 in | Circle - Blade Beam Thickness: 1.6 in | Drawbar - Thickness: 0.5 in | Front-Top/Bottom Plate - Thickness: 0.87 in | Front Axle - Wheel Lean - Left/Right: 18° | Front Axle - Total Oscillation per Side: 32° | Sidewall Thickness - Inner: 0.63 in | Sidewall Thickness - Outer: 0.71 in | Drive Chain Pitch: 2 in | Wheel Axle Spacing: 60 in | Tandem Oscillation - Front Up: 15° | Tandem Oscillation - Front Down: 25° | Cutting Edge Thickness: 0.6 in | Circle Centershift - Right: 28.7 in | Circle Centershift - Left: 27.4 in | Moldboard Sideshift - Right: 26 in | Moldboard Sideshift - Left: 20.1 in | Maximum Blade Position Angle: 90° | Blade Tip Range - Forward: 40° | Blade Tip Range - Backward: 5° | Maximum Shoulder Reach Outside of Tires - Right: 77.9 in | Maximum Shoulder Reach Outside of Tires - Left: 70.5 in | Maximum Lift Above Ground: 18.9 in | Maximum Depth of Cut: 28.1 in | Ripper Shank Holder Spacing: 21 in |Scarifier Shank Holder Spacing: 4.6 in | Scarifier Shank Holder Spacing: 10.5 in
  • Outside Front Tires: 25.59 ft | Arc: 16.3 in
  • Drawbar: 3 in | Front Frame Structure: 12 in | Front-Top/Bottom Plate: 12 in | 7.9 in | Blade: 12 ft | Cutting Edge: 6 in | End Bit: 6 in | End Bit - Thickness: 0.6 in | Moldboard - Blade: 12 ft | Working: 40.6 in / 47.4 in / 46.6 in / 84 in | Outside Front Tires: 98.9 in | Outside Rear Tires: 98.9 in | Tire Center Lines. 84.3 in
  • Drawbar: 6 in | Front Frame Structure: 12.6 in | Circle: 5.4 in | Front Axle - to Center: 23.5 in | 19.9 in | Moldboard: 24 in | Moldboard - Thickness: 0.87 in | Top of Cab: 130 in | Front Axle Center: 23.5 in | Exhaust Stack: 128 in | Top of Cylinders: 120 in
  • Throat: 6.5 in | Rear Axle: 13.3 in
  • Machine Increase, Beam Raised: 40.6 in | Counterweight to Ripper: 399 in | Front Axle to Mid Tandem: 241 in | Front Tire to Rear of Machine: 351 in | Front Axle to Moldboard: 100 in | Between Tandem Axles: 60 in
  • Ripping: 16.8 in | Scarifying: 18.4 in /16.8 in / 11.5 in
  • Circuit Type: Parallel
  • DEF: 5.8 gal (US)
  • System - Total: 26.4 gal (US) | System - Tank: 16.9 gal (US)
  • Reservoir Tank: 16.9 gal (US) | Tank: 104 gal (US)
  • Engine: 7.9 gal (US)
  • 15 gal (US)
  • Blade Pull - Base GVW: 25269 lb | Blade Pull - Maximum GVW: 34262 lb | Blade Down Pressure - Base GVW: 16038 lb | Blade Down Pressure - Maximum GVW: 29309 lb | Gross Vehicle - Maximum - Front Axle: 17075 lb | Gross Vehicle - Maximum - Rear Axle: 38069 lb | Gross Vehicle - Base - Front Axle: 9343 lb | Gross Weight - Base - Rear Axle: 28077 lb | Gross Vehicle - Maximum - Total: 55144 lb | Gross Vehicle - Base - Total: 37420 lb
  • Operating Typically Equipped: 42647 lb | Operating - Typically Equipped - Front Axle: 12055 lb | Operating - Typically Equipped - Rear Axle 30592 lb | Operating - Typically Equipped - Total: 42647 lb