2025 Caterpillar Small Dozers D1 LGP
- Year 2025
- Make Caterpillar
- Model Small Dozers
- Engine Model: Cat C3.6
2025 Caterpillar Small Dozers D1 LGP
Work Looks Better from HereThe Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.
Features may include:
IMPROVED VISIBILITY- The sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.
- Cat small dozers include a suite of Operator Assist features that work seemlessly to save time, effort, fuel, machine wear and overall costs.
- The D1 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacri?ce when ECO mode is active.
- The D1 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.
- The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Tier 5 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Engine
Engine
Model: Cat C3.6
Engine Power
Net: 80 hp | Net - 2,200 rpm - SAE J1349: 80 hp | Net - 2,200 rpm - ISO 9249/EEC 80/1269: 80 hp
Displacement
220 in³
Drivetrain
Drivetrain
Hydrostatic | Winch: Hydraulic | Winch High Performance: Hydraulic
Operational
Operating Speed
Maximum Travel - Reverse: 6.2 mile/h | Maximum Travel - Forward: 5.6 mile/h
Ground Pressure
LGP: 4.3 psi | LGP, 762 mm (30 in): 3.7 psi
Operating Conditions
Maximum Line Pull - Full Drum: 79 ft/min | Maximum Line Pull - Bare Drum: 50 ft/min | Maximum Line Speed - Full Drum: 20350 lb | Maximum Line Speed - Bare Drum: 32150 lb | Maximum line pull – bare drum High performance: 40000 lb | Maximum line speed – full drum High Performance: 207 ft/min
Hydraulics
Maximum Pressure
Relief Valve Settings: 7033 psi / 2988 psi
Hydraulic Flow
Pump Output: 17.2 gal/min
Dimensions
Gauges
Track LGP: 68 in | LGP, 762 mm (30 in): 73 in | Blade LGP: 67.9 in
Width
Shoe LGP, 762 mm (30 in): 30 in | Shoe LGP: 25 in | of Dozer (standard shoes, no blade): 74.8 in | Blade at Maximum Angle - LGP: 113.1 in | Blade LGP: 124 in | Drum: 9.65 in | Drum High Performance: 10.8 in
Length
Track on Ground - LGP, 762 mm (30 in): 89 in | Track on Ground - LGP: 89 in | of Basic Dozer (without blade): 129.6 in | Winch: 35.63 in | Winch high performance: 27.76 in
Height
Ripper: 6.5 in | Dozer LGP: 108.9 in | Blade LGP: 33.8 in | Blade LGP, 762 mm (30 in): 167.8 in
Ground Clearance
Ripper Maximum Under Tip: 17.6 in | Blade LGP: 13 in | Blade LGP, 762 mm (30 in): 13 in | Throat: 5.6 in | Throat High performance: 6.75in
Depth, Maximum
Ripper Digging: 13.3 in | Blade Digging LGP: 23 in
Overall Width
Ripper: 67.3 in | Winch: 27.91 in | Winch High performance: 29.2 in
Dimensions
Ripper Maximum Reach - Ground Line: 30.2 in | Blade Cutting Edge Angle, Adjustable: 52° to 58° | Blade Maximum Angle (either side): 25° | Blade Maximum Tilt LGP: 17.2 in | Drum Capacity - Recommended Cable: 277 ft | Rope Diameter - Recommended: 0.63 in | Drum Diameter: 8 in | Drum Diameter High Performance: 10 in
Lift Height
Blade LGP: 28.7 in
Overall Length
Blade: 168 in
Capacities
Cooling System
4.2 gal (US)
Features
Diesel Exhaust Fluid (DEF) Tank: 4.9 gal (US) | Final Drive - Each - LGP: 2.6 gal (US) | Crankcase - With Filter: 2.8 gal (US) | Final Drives - Each Side: 2.6 gal (US)
Hydraulic Capacity
Tank: 23.8 gal (US)
Fuel Capacity
51.5 gal (US)
Cargo Capacity
Blade (SAE) - LGP: 1.99 yd³
Weights
Weight, In Running Order
18839 lb | LGP, 762 mm/30 in: 19295 lb | Ripper: 1222 lb | Retieval Winch: 1747 lb | High Performance Winch: 1345 lb
Features
Features
Drive Pumps: 1 | Track Motors: 2 | Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage: 43 | Number of Rollers - Each Side: 6 | Number of Shoes - Each Side - Abrasion Undercarriage: 38 | Ripper Type: Parallelogram | Number of Shanks: 3 | Control: Hydraulic